Geovision For Mac

 
The GV-COM V2 adds one RS-485 port to your computer through a USB connector. The GV-COM V2 can convert the standard RS-232 signal, through USB connector, to RS-485 2-wire control for PTZ cameras, GV-Data Capture Box or any other RS-485 devices.
  • Specifications
  • Download
  • Ordering Info

Serial Interface RS-485 Signal: RS485+, RS485-
Connector: Terminal Resistance Switch (120Ω)
Serial Line Protection
16 KV ESD for All Signals
USBComplianceUSB 2.0 Backward Compatible
SpeedFull speed 12 Mbps
Communication ParametersParityNone, Even, Odd
Data Bit7, 8
Stop Bit1, 2
Flow ControlRTS / CTS, XON / XOFF
Speed600 bps to 115,200 bps
Environmental ConditionsOperation Temperature0~55°C / 32~131°F
Humidity5%~95% (Non-Condensing)
Dimensions (W x H x D)68.5 x 33.5 x 16 (mm) / 2.7 x 1.32 x 0.63 (in)
Note: Specifications are subject to change without notice.
GeovisionGeovision for mac installer

Geovision For Mac Download

See and discover other items: outdoor wide angle zoom security camera, poe security camera systems for mac, 180 level, geovision camera, Local Storage Security Cameras, compact camera with video There's a problem loading this menu right now. Recording IP Cameras to GV-NAS System through GV-Edge Recording Manager - Mac Version GV-NAS System is a Linux-based, network attached storage device designed to store GV-IP Camera and GV-Target Camera recordings. Start Multicam and Webcam Server Step2. The port to connect to GV-DVR/NVR is 56000, Please make sure port 56000 for GV-DVR/NVR is opened. Start GV-Edge Recording Manager from Mac system Step4. Scan Network and you should see the IP Cameras w/ DVR/NVR software running. Select and enter ID/PW.